
阿多里尼终身质保

加固雪茄盒体和西班牙雪松衬里

加固实象限铰链 - 镀银手工抛光

丙烯聚合物为基础的阿多里尼(Adorini)豪华镀银加湿器,含可调节通风开口,以保持最佳湿度水平

预校正高精度毛发湿度计,适合存储雪茄

湿度计和加湿器用磁铁固定在木质饰面下方的隐蔽金属板上

抽屉底部由可以保证最大空气流通的木排和灵活放置的隔板

创新分隔系统,可以灵活地单独分隔。受保护的安道里尼(Adorini)创新设计

独特的通风排(“RibTech”),改善雪茄盒内的空气流通。受保护的阿多里尼(Adorini)创新设计

分隔器标签夹。受保护的阿多里尼(Adorini)创新设计
Very nice humidor, despite its compact size, with plenty of space.
The Cube, in my opinion, is not of good quality: The door springs back when closing and remains open with a gap of about 3mm. But that's not all—if you push it shut, you'll see a wedge-shaped gap where the door is flush with the Cube at the bottom, but there's about 1mm of space at the top. The hinge can't be adjusted, I’ve tried extensively. You can’t realign the door either... I’ve tried that as well. Since I don’t live in Germany and returning it would be very expensive, I’ve now installed a strong 5mm bar magnet with an opposing screw... this keeps the door closed and sealed. The next issue is with the dividers. Since the Cube unfortunately has floor grooves (ridges) running across the opening, in my opinion, to access everything easily, you need to use the milled dividers with the comb at the bottom. However, they are so difficult to insert that teeth have already broken off, and I’m really not a clumsy person. They are milled across the grain (who does that?), and even light pressure can easily break a tooth off. Therefore, I’ll be using the un-milled dividers and storing my items in a row, i.e., deeper inside. All in all, extremely disappointing.